30 Second Elevator Pitch: Why Yours Probably Runs Too Long

A 30 second elevator pitch leaves room for about 55 to 80 spoken words. How to choose what stays, a worked example you can time, and how to rehearse it without sounding rehearsed.

Published Nov 5, 20264 min read

Someone at a conference reads your badge, says "so what do you do?", and you have until their attention drifts back to the coffee queue. You start with the company history, reach the second sentence about your approach, and watch their eyes go. A 30 second elevator pitch is shorter than it feels when you write it down, and a first draft can easily run well past the time you have.

How many words fit in 30 seconds

Speaking pace does the sums for you. At a slow 110 words per minute, half a minute holds 55 words. At an average 130 it holds 65, and at a brisk 160 it holds 80. Those are the three pace presets in the speech time calculator, and they frame the budget better than any rule about sentences.

Stretch the slot and the numbers grow in proportion: 45 seconds gives you roughly 83, 98 or 120 words, and a full minute gives you 110, 130 or 160. Plan for the middle figure, because a pitch written for 80 words only works if you never pause, and a pause after your main point is usually the most useful second you have.

Sixty-five words is about the length of the paragraph you just finished reading, give or take. Hold that picture in your head while you cut.

Writing a 30 second elevator pitch that leaves things out

The draft usually fails because it tries to explain the whole business, when its only job is to earn the next question. So decide who you help, what changes for them, and what you want from this particular person. Almost everything else can wait until they ask.

Here is an invented example, for an imaginary company, so you can see what that budget feels like:

"You know how small clinics lose hours chasing rejected insurance claims? We built software that spots a rejected claim the day it comes back and drafts the fix for the billing team to approve. We're testing it with a few clinics now, and I'm looking for two more practice managers to try it. Do you know anyone who runs one?"

That comes to 60 words, so it sits comfortably inside the average-pace budget with a little room to breathe. Notice what is missing. It has no founding story, no technology, no market size and no list of features. Each of those would make a reasonable answer to a follow-up, and a follow-up is the outcome you were after.

The last sentence does more work than it appears to. A pitch that ends on a description leaves the other person to think of something polite to say. One that ends on a small, answerable question gives them something to do, and a stranger can answer "do you know anyone who..." without committing to anything.

Timing it without fooling yourself

Silent reading is a poor guide, since your eye skips over the places where your mouth will stumble. Paste the draft into the calculator to get the word count and the time at each pace, then read it aloud against a clock. If the two disagree, trust the clock, and remember that you have just measured the calm version. Many people speed up when they are nervous and slow down when they are searching for a word, so a pitch that only just fits at your desk has no margin on the day.

If you need the budget before you have any text, the calculator also works backwards: choose the target-time mode, enter 0.5 minutes and it returns the words you can afford.

Saying it so it doesn't sound recited

Memorising the exact words tends to produce exactly what you are trying to avoid. Learn the order of the ideas instead, and run through it a few times with different wording, so that the sentences come out slightly differently each time. Some people find an online teleprompter useful at the start, or for a pitch recorded on video, where reading is less obvious. In a hallway, nobody wants to watch you recall a script.

Say you are asked to pitch from a stage with one slide behind you. Keep it to a single line someone can read while listening, along the lines of the advice on how many words belong on a slide. The slide then supports the sentence you are speaking, and your 30 seconds are still spent on the person in front of you.

What this can't do yet

ToSlides will not write your pitch for you with these tools, and the speech time calculator only estimates from average pace presets, so it cannot hear your real delivery or tell you whether the message is any good. The free tools do not record or score rehearsals. If you build a slide to go with the pitch, ToSlides ships four themes, with no animated transitions, motion graphics or drag-and-drop layout canvas. AI generation requires signing in with an EndTo account and uses credits — only the ten browser tools are free without an account.

Frequently asked questions

How many words should a 30 second elevator pitch have?

Roughly 55 to 80 words, depending on your pace. At 110 words per minute you get 55, at 130 you get 65 and at 160 you get 80. Aim for the middle so you still have time to pause.

What should an elevator pitch include?

Who you help, what changes for them and what you want from the person listening. Leave out your history, technology and full feature list, since those make better answers once someone has asked a follow-up question.

How should I end an elevator pitch?

End on a small question the other person can answer easily, such as whether they know someone who might be interested. That hands them a clear next step and avoids an awkward silence after your description.

Is 30 seconds the right length for every pitch?

No. It is a useful discipline for a chance meeting, but a scheduled intro or a competition may give you a minute or more. Ask what time you have, then scale the word budget to match it.

Do I need slides for an elevator pitch?

Usually not, because most of these conversations happen with nothing to show. If an event asks for a slide, one short line that people can read while they listen supports your words better than a full page.

Keep reading